The split air conditioner is indispensable equipment these days

It is estimated that there is at least 1 air conditioner in every home throughout the world.Split air conditioner is equipment that does heat exchange indoors, allowing cooling, regular temperature, humidity, cleaning and ventilation.

The split air conditioners take this name because they are divided into two parts

The one that is inside the environment is called evaporator unit (where the cold air comes out). The other unit on the outer side of the room is called the unit. Condenser is a place where the hot air comes from the internal heat exchange. The split air conditioner is the most modern and used type nowadays.  

To install split air conditioning you need to keep the following points in mind

  • Know the structure where it will be installed.
  • Choose the thermal capacity of the equipment.
  • Define the location of the environment where it will be installed.
  • Have the tools and materials needed for installation

In this matter you will know how to install split air conditioner in apartment, residence or company step by step. You will also learn how to install split air conditioning from the various brands, since the split air installation has the same process for different brands. In order to know more about Air conditioning installation Geelong, you can always seek help online.

How to install split air conditioner? What do you need?

First, always follow the manufacturer’s split air installation schedule. Choose where the evaporator and condenser unit will stay. Know that the internal and external units are interconnected by copper pipes and wires for electric power.Therefore, the closer you get the lower the cost with materials and labor. What are the basic materials used to interconnect the indoor and outdoor units of the air conditioner? Copper or aluminum tubes (also called refrigeration tubing), with gauges and thicknesses appropriate to the thermal load specified in the equipment.

Heat Insulation Tubes

PVC pipes for drainage of water connected to the pluvial network of the building (residence or company). Electrical wiring with cables sized according to the load of the air conditioner. Exclusive circuit breaker for each air conditioner is very essential. If you are building and installing air conditioning pass the infrastructure through the walls at the time you do the hydraulic and electrical installation. If your home or office is ready and you decide to install the split air conditioner later you will need to open passage for pipes on the wall, on the counter floor or embed in the plaster lining. If your home is in structural masonry do not break walls. You can leave the tubing clear or go through the plaster lining.

How to calculate the thermal capacity of the split air conditioner for your environment?

Choose the best place to install split air conditioner, avoid installing the evaporator unit in the wall that is too hot. Do not install the evaporator above electrical equipment, such as TVs and computers, as they can be damaged if water evaporates. Leave the evaporator free, at least 15cm from the ceiling or according to the specifications of the appliance and consider that it needs to be easy to access for future cleaning, maintenance or exchange of filters. The condenser unit should be installed outdoors, in a well ventilated place where it does not take direct sunlight to increase the air conditioning life.

How to install split air conditioner step by step?

Installing split air conditioning may seem difficult. However, understanding step by step becomes much simpler and easier for anyone who has done a split air conditioning course. Typically, the most difficult part of the installation is to drill the hole connecting the indoor unit to the outdoor unit.

Comments are closed.